Fresh ginger is not stored for a long time, but if the ginger is dried and stored, it is not only good for collection but also greatly prolongs the storage time. In 2021,Guoxin sold the
ginger dryer to Vietnam.The customer feel very satisfied with the drying effect.The guoxin ginger dehydrator dry fresh ginger at low and middle temperatures, which dry the ginger better. The dried ginger do not change any of its nutritional value. The scent of the ginger is preserved and the taste is better. The ginger heat pump dryer machine is essentially a heat lifting device. heat pump drying unit uses the reverse Carnot principle to absorb heat from the surrounding environment and transfer it to the raw ginger to be heated.
Advantages of ginger heat pump dryer machine♥ It can realize low-temperature air closed circulation drying, and the material drying quality is good. By controlling the working conditions of the machine, the temperature of the hot dry air in the drying chamber is between 20 and 80°C, which can meet the high-quality drying requirements of most heat-sensitive materials;
♥ High efficiency and energy saving. The heat of the heated air in the heat pump dryer mainly comes from the sensible heat and latent heat contained in the warm and humid air discharged from the recovery drying chamber. The energy that needs to be input is only the power consumption of the heat pump compressor, and the heat pump consumes a small amount of power to produce The advantage of taking a lot of heat, so the heat pump drying device SMER (the water content in the wet material removed by the unit of energy consumption) is usually 1.0 ~ 4.0 kg/kWh, while the SMER value of the traditional convection dryer is about 0.2 ~ 0.6 kg/kWh.
♥ Convenient temperature and humidity control. When the material has high requirements for the temperature and humidity of the air entering the drying room (such as wood, etc.), the evaporation temperature and condensation temperature of the working fluid in the evaporator and condenser can be adjusted to meet the material's texture and appearance requirements.
